Pressure Treated Wood Disposal: What to Do With Old Lumber

The short answer: never burn pressure treated wood, never chip or compost it, keep it separate from other debris, and send it to the disposal route your local landfill or transfer station allows. Federal law doesn’t list treated wood as hazardous waste, so the rules come from your state and county, which is why the same deck boards can go in the trash in one place and need a special facility in another. If you have a whole deck, fence or playset to clear, the fastest clean route is to have a hauler take the load so you never have to sort, load and haul it yourself. We do that in Hampton Roads, VA and Berks County, PA.

Pinkysjunkremoval
Clear Out Old Lumber Without the Hauling
Pinky’s removes renovation debris across Hampton Roads and Berks County, with upfront pricing and clear communication.

TL;DR

  • Do not burn treated wood in a fireplace, wood stove, fire pit or burn barrel. Pennsylvania’s open-burning guidance and Vermont, Connecticut and Nebraska rules all rule it out.
  • Do not chip, mulch, compost or bury it. Keep it apart from clean wood and ordinary yard waste.
  • Federal law doesn’t classify treated wood as hazardous, so your state, county or landfill sets the rules. Call before you haul.
  • Cut boards to manageable lengths and bring them to the landfill or transfer station only after confirming they accept treated lumber.
  • For a big deck, fence or renovation pile, a hauler can remove the whole job in one visit, with pricing set before the work starts.

Table of Contents

What pressure treated wood is, and why it needs different handling

Pressure treated lumber is wood that has been forced full of preservatives so it resists rot, insects and fungi. The most common formula for decades was CCA, short for chromated copper arsenate. Iowa’s Department of Natural Resources explains that CCA wood is injected under high pressure and is typically light green or stained brown. It turns up in fences, posts, playsets, decks and gazebos.

On February 12, 2002, EPA announced a voluntary phase-out of CCA for most residential uses, effective December 31, 2003. So a deck or fence built before about 2004 is likely CCA. Newer lumber uses other copper-based preservatives, and railroad ties and some utility poles use creosote.

Timeline of the residential CCA phase-out

The chemicals matter at disposal time because they don’t disappear when the wood is old. The same Iowa document notes that arsenic slowly leaches out of CCA wood depending on species, rainfall, soil acidity and the age of the structure.

How to tell whether your wood is treated

StopWaste, a California public agency, lists the signs of treated wood:

  • Small surface indentations or incising marks
  • A greenish tint or dark brown discoloration
  • Manufacturer stamps or end tags
  • Staining only around the outer edge when you cut it
  • A solid outer shell with rot inside
  • A chemical smell

The same page notes that natural unpainted wood and wood with a surface finish such as varnish, shellac or polyurethane is not treated wood waste. If a pile mixes both, treat the whole pile as treated unless you can separate it cleanly.

Why you can’t burn it

This is the question most people search, and the answer is firm. EPA advises against burning creosote or other preservative-treated wood in a residential setting because of toxic chemicals in the smoke and ash. Nebraska’s environmental agency goes further: burning creates new compounds more dangerous than the original treatment chemicals, releases chemicals into the air, and leaves ash that can carry highly mobile residue into surface and groundwater.

The legal side points the same way:

That covers the fire pit, the wood stove and the burn barrel. Offcuts count too. A single deck board in a backyard fire is still treated wood in a fire.

What not to do with the scraps

Beyond burning, the agencies agree on a short list of no’s:

  • Don’t compost it or use it as mulch. Washington’s Department of Ecology says to never burn, compost or mulch treated wood. Connecticut adds that sawdust, chips and scraps should never go in a compost pile.
  • Don’t chip or grind it. Nebraska notes that chipping increases surface area and exposes unweathered material. Vermont requires treated wood to stay separate from clean wood and not be shredded before disposal.
  • Don’t mix it into a yard-waste or recycling pile. Yard waste goes to composting. Treated wood in that stream contaminates it.
  • Don’t bury it. Minnesota’s pollution control agency lists burying alongside chipping, grinding and burning as methods not to use for disposal.

When you’re cutting old boards to make them easier to carry, keep the sawdust off the ground and bag it with the rest of the treated material.

Where treated wood can legally go

There isn’t one national answer, and that’s the source of most of the confusion you see in homeowner forums. The National Pesticide Information Center states that treated wood is not listed as hazardous waste under federal law, that EPA doesn’t regulate its reuse and disposal, and that state and local governments may have their own instructions. In practice you’ll land in one of these routes.

RouteWhat it meansWhat to check
Household trashSome places allow small amounts of treated wood in regular pickup. EPA says creosote-treated wood from homeowners can usually go out as ordinary municipal trash, subject to local guidance.Your hauler’s size, weight and bundling limits.
Landfill or transfer stationMany accept treated wood if it is separated from other debris. Nebraska directs it to a permitted landfill, cut to 8 feet or less if possible.Call the manager first. Ask about fees and whether it must be in a separate pile.
Special facilitySome jurisdictions treat it as a special or hazardous waste. California, for example, limits it to authorized landfills.Paperwork, scale-house declaration, higher tipping fees.
ReuseWashington tells households they can reuse it for its original purpose.Only for sound lumber, used the same way as before.

Two examples show how much it varies. Riverside County, California requires you to call ahead, complete a bill of lading and declare the load, and a hard-to-handle tipping fee applies. If the treated wood isn’t separated from other waste, the entire load is billed at that rate. Illinois, meanwhile, says weathered treated wood with no surface deposits or staining bound for disposal is non-special solid waste, while non-weathered or stained wood needs a hazardous waste determination.

The lesson is the same everywhere: the way it’s sorted matters, and a phone call before loading saves a wasted trip and a surprise fee. For Virginia and Pennsylvania, call your county landfill or municipal solid waste authority and ask three things: do you accept treated lumber, does it need to be separate, and what is the fee per ton or per load.

Homeowner steps: a deck, fence or playset teardown

  1. Decide whether it needs to come down at all. EPA doesn’t recommend removing existing CCA structures that are in good shape, according to Iowa DNR’s summary. If the deck is sound, power washing a wooden deck and resealing it can extend its life and put off disposal entirely.
  2. Gather the right gear. Gloves, long sleeves, eye protection and a dust mask while cutting. Wash your hands and clothes afterward.
  3. Separate as you go. Make one pile for treated lumber, another for clean scrap, a third for metal fasteners. This is what keeps landfill fees down and keeps the load acceptable.
  4. Cut to length. Boards under 8 feet fit most landfill and trailer requirements. Cut over a tarp so the sawdust is contained.
  5. Confirm the destination. Call before loading. Ask about fees, hours and whether a separate pile is required.
  6. Haul it in a covered truck or trailer. Loose boards sliding off a bed are a safety problem and a legal one.
  7. Declare it at the scale house. Tell the operator it is treated wood. Mislabeling it can get the whole load rejected or billed at the higher rate.

That is the do-it-yourself route, and it is a Saturday or two of work for a typical deck: demolition, cutting, loading, a landfill trip and a fee at the scale. Having the load picked up is simpler for most households, and the rest of this article covers when that makes sense.

When hauling it away is the smarter move

Several situations push this from a weekend project to a job worth handing off:

  • Downsizing or selling a house. A rotting deck, a collapsed fence section or a pile of old posts can hold up a listing. Adult children managing a parent’s house from out of town rarely have a truck, a free weekend and a landfill’s hours to work around.
  • PCS orders. Military families leaving Norfolk on a tight move-out timeline often find a backyard play set or fence panels on the final inspection list.
  • Landlords and property managers. Turnovers with deck, fence or shed debris need to be cleared by a date, not whenever the landfill is convenient.
  • Renovations. Contractors who tear out a deck sometimes leave the lumber behind, and a pile in the front yard draws HOA complaints.
  • Small businesses. A retail storefront with a rotted wooden planter or a loading-area ramp needs the debris out without closing for a day.

In each case the value is the same: someone else loads, hauls and takes responsibility for getting the material to the proper place, and you get a price before they start.

What it costs to have it hauled

Our pricing is set up so you know the number before we lift anything. We price by item, by truck volume, or by bedload for heavy debris:

Pricing typePublished range
Single item pickupFrom $48
Volume pricing (by truck space used)$164 to $698
Bedload pricing (heavy debris)$286 to $698
Labor surcharge$100 per hour per person
Car tire surcharge$15 each
Truck tire surcharge$30 each

A couple of old fence posts is a single-item conversation. A full deck’s worth of boards, rails and stairs is a volume or bedload job, because lumber is dense and heavy. Compare that with the do-it-yourself math: a rental truck or trailer, a landfill fee that may be higher than regular trash, your time, and possibly a second trip when the first load is turned away.

What we do about it

We haul renovation and construction debris, yard waste and outdoor items for homes and businesses, with same-day and next-day service across Hampton Roads (Virginia Beach, Norfolk, Chesapeake, Portsmouth, Suffolk, Hampton, Newport News) and Berks County, PA (Reading, Wyomissing, Sinking Spring, West Lawn). Our renovation and construction debris service is built for exactly this kind of teardown, and when you call, a local person answers, not a national call center.

We see it constantly: a family spends a weekend tearing out a deck, then discovers the last step, getting the wood to the right place, is the hard one. Nobody wants to guess at the rules, so the pile sits in the yard.

Our view is that this is a job to hand over. You get a fair price upfront, a crew that shows up on time, and the Pinky’s Promise: easy booking, clear communication and doing it right the first time. We donate and recycle whenever possible, and we’re locally owned, never a franchise.

If you’re clearing a house for a move or a sale, put the lumber on the same pickup as everything else. One visit, one price.

David

Book the pickup

If you have a deck, fence, playset or pile of old lumber to clear, we can quote it by item, volume or bedload and take it off your property, same day or next day where our schedule allows. Single items start at $48, and the full price list is on our pricing page.

Pinkysjunkremoval

When you’re ready, schedule a pickup online or call 1-800-41-PINKY.

Tips for a cleaner, cheaper pickup

  • Stack the boards together in one spot, ideally at the curb or near the driveway, so crews aren’t carrying them through the yard.
  • Pull out the nails and screws you can reach. It makes handling safer.
  • Keep treated and untreated wood in separate stacks. If you aren’t sure which is which, use the identification signs above.
  • Bundle the rest of the cleanout with it: old furniture, a worn-out appliance, a tired shed door. Our prep guide covers how to get ready the night before.
  • Tell us what’s in the load when you book, including how big the project was, so the quote matches the job.

FAQ

Can you burn pressure treated wood?

No. EPA advises against burning preservative-treated wood in a home setting because the smoke and ash carry toxic chemicals. Pennsylvania’s open-burning guidance excludes treated wood from what residents may burn, and several states prohibit it outright. This applies to fireplaces, stoves, fire pits and burn barrels.

Can I put pressure treated wood in the regular trash?

Sometimes, in small amounts. Washington State’s Ecology department says households can dispose of treated wood in household trash or a moderate risk waste facility, and EPA says creosote-treated wood from homeowners can usually go out as municipal trash. Your local hauler sets size and bundling limits, so check with them first. A full deck is too much for curbside pickup.

Do landfills take pressure treated wood?

Many do, but not all, and often with conditions. Nebraska directs treated wood to a permitted landfill and advises calling the manager first. Expect to separate it from other debris and possibly pay a higher fee. Call your county landfill before you load the truck.

Is old pressure treated wood hazardous waste?

Not under federal law. The National Pesticide Information Center states that treated wood isn’t listed as hazardous waste federally, and that states and localities may add their own requirements. Some states, such as California and Illinois in certain cases, apply stricter rules, so your local rule is the one that counts.

Can I reuse old treated lumber instead?

Yes, if it’s sound. Washington’s guidance names reuse for the original purpose as an option for households. Don’t use old treated wood for things like garden-bed edging near food or for firewood, and never as mulch or compost.

Sources

Related Posts